Table of Contents
Advertisement
Getting Started
To connect your phone to your laptop or other
device:
1 Open the connector cover.
connector
cover
2 With the phone's display facing up, insert the
data cable's connector into the accessory
connector, until you hear a click.
Using GPS with Map Software
3 Insert the data plug into the COM port of your
laptop or other device.
Make sure no other application is using the COM
port selected.
Make sure the COM port settings of your laptop or
other device are set to the following:
• Bits per second: 4800
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: Hardware
To set your phone to send location information to
your laptop or other device:
1 From the main menu, select GPS > Interface.
2 Set NMEA OUT to On.
Your phone is now sending location data to your
laptop or other device.
To stop your phone from sending location data to
your laptop or other device:
Set NMEA OUT to Off.
Each time you power your phone on, NMEA OUT
is automatically set to Off.
93
Advertisement
Table of Contents
