Motorola EASY START KIT HMEZ1000 Quick Start Manual page 7

Easy Start Kit
17 Click Next. The Finish Setup window is displayed. Click Finish to complete the setup. The Home
Monitor Control Panel is displayed:
Remote Notification Setup
This section instructs you on how to configure and test your Remote Notification using your Wireless
Camera. It configures an Event Setup using your Wireless Camera and then guides you through noti-
fication configuration.
Event Setup for Wireless Camera
1 From the Control Panel window, access the properties for your Wireless Camera by clicking the
Edit Properties icon of your Wireless Camera.
2 Name your camera as you wish and alter the settings of the camera to 60 seconds Quiet Period
Before Rearming, 10 second Video Capture Length and leave the Brightness, Contrast, and
Quality at their default settings. For more information, see the Motorola Home Monitoring &
Control System User Guide.
3 Click Event Setup.
4 Choose a Sensor Device, in this case, your Wireless Camera.
5 Choose Motion Detected for your Event.
6 Select Send to Local Archive.
7 Click Update to save the changes to your Wireless Camera and your Event Setup is complete.
Quick Start Guide
Page 5