Motorola EASY START KIT HMEZ1000 Quick Start Manual page 5

Easy Start Kit
Installing the Software and USB Gateway Hardware
Do not connect your USB Gateway to your computer until the Installation Wizard instructs you to do so.
1 Insert the Motorola Home Monitoring & Control System CD in the CD-ROM drive. The Motorola
Home Monitor Installation wizard is displayed.
a If the application does not appear, right-click the Start button and select Explore.
b Select your CD-Rom and click to open.
c Double-click Launch.exe to start the application.
2 Click Next. The Choose Destination Location window is displayed.
3 Click Next to accept the default destination folder or click Browse to select a new one. After you
click Next, the Select Program Folder window is displayed.
4 Accept the default folder or choose a new one. Click Next. The file installation begins. After a few
moments, the Install Motorola Home Monitor Hardware and Driver window is displayed.
5 Remove the back cover from your USB Gateway.
6 Plug the AC adapter into the Power port on the USB Gateway and into an AC wall outlet. This
powers on your USB Gateway.
7 Connect the USB cable on the Gateway to the USB port on your computer. Windows automatically
installs the required drivers.
8 If desired, replace the USB Gateway back cover as described in the Motorola Home Monitoring &
Control System User Guide.
9 Once the driver installation is complete, click Next. The Software installation was successful
window is displayed. Be sure the checkbox "Launch Motorola Home Monitor" is selected.
10 Click Finish. The Motorola Setup Wizard is displayed.
USB port on
PC (step 7)
Power
Video
Status
Data
AC adapter
(step 6)
Quick Start Guide
Page 3