Download Print this page

Line Voltage Selector Switch - Pioneer SX-2800 Operating Instructions Manual

Hide thumbs Also See for SX-2800:

Advertisement

LINE VOLTAGE SELECTOR SWITCH
with this switch.
switch as follows
1, Use a mediurn-size screwdriver
Medium-size screwdriver j
EM Antenna
AM Loop Antenna
CHANNEL STEP SWITCH
{Multi-voltage model only)
(Not available on U.S. and Canadian models)
The unit has been factory preset to the channel! allocation and de-
emphasis value for the area in which it is to be sold. if these values are
set incorrectly, the frequency display may stop at the wrong frequency,
or sound may be distorted, resulting in an inability to reproduce reception
signais at their proper sound quality. For this reason, be sure to confirm
that the values are set correctly before first using the unit
{100 kHz/10 kHzjposition:
Set to this position for areas with an FM reception step of 100 kHz,
AM
10 kHz
{50 kHz/S kHziposition:
Set to this position for areas with an FM reception step of SO kHz, AM
9 kHz
NOTE:
When unsure about the channel allocation and de-emphasis values for
your area, consult your dealer for correct information.
CHANNEL
STEP
BOkHz=FM=100kHz
SkH2——
AM—
1OkHz
seaemeenattiiiccmmmmnnanmeed
|
WD
'
Other countries
North and South America
Setting Up the AM Antenna
i
| * Insert the clip on the bottom of the antenna inte the groove on
| the leg.
|
; * Place the antenna on a level surface and rotate it to locate the |
orientation that yields the best reception
i
* To permanently
fix the antenna,
screw
the leg to a wall or
something similar before assembling {fixing the antenna in the
direction that gives the best reception)
Ww
<ARBI285>

Advertisement

loading
Need help?

Need help?

Do you have a question about the SX-2800 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Sx-1900