Troubleshooting - Pioneer SX-2800 Operating Instructions Manual

TROUBLESHOOTING
* Speaker connecting wires are disconnected from | * Connect wires to terminals securely.
speaker terminais.
|
* One or both of the input cords are disconnected. | * Connect input cords securely,
* TAPE 2 MONITOR button is in the ON position. * Press the button to OFF position
when Function switch is
selected.
when the power switch of |
other components is turned
ON or OFF,
High noise level,
aoe a eee a eee . rn
* Station has not been tuned in to correct | * Tune the station correctly
frequency.
* Antenna has not been connected or has become | * Connect the antenna securely.
disconnected.
| FM reception
* Accessory FM antenna remains bundled up. * Stretch the antenna taut and point in direction
H
yielding optimum reception.
* Weak broadcasting station signals. * Replace accessory FM antenna with outdoor
FM antenna
} signals which have been reflected by mountains
or high buildings on their way to antenna. This
tesults in distorted sound and noise.
| i position where reception is improved.
* Weak broadcasting station signals.
* Erect outdoor AM antenna or connect ground
wire.
* Perform manual tuning.
Abnormal functioning of this unit may be caused by lightning, static
electricity, or other external interference. To restore normal operation,
turn the power off and then on again, or unplug the AC power cord
and then plug it in again.
rporation
co Corporation
P.O. BOX 1720, Long Beach. Caiifornia 90801, U.S.A.
PIONEER ELECTRONICS OF CANADA, INC.
505 Cochrane Drive, Markham, Ontario L9R 83, Ca
PIONEER ELECTRONIC [EUROPE] N.V._
Keetbergfaan 1, 2740 Beveren, Belgium, TEL: 03/750.0511
PIONEER ELECTRONICS AUSTRALIA PTY.LTD.
178-184 Boundary Road. Braeside, Victoria 3195, Australia, TEL: {03] 580-9951