Advertisement
TAPE RECORDING
COPYING TAPES
When two cassette decks are used, the sound played back on the deck
* To make a tape copy with contents Identical to the original tape.
connected to the TAPE
1 /DAT jacks can be recorded on the deck
* To edit a recording of an FM broadcast in order to cut out unwanted
connected to the TAPE 2 jacks.
commercials, recording only the desired material onto another tape
TAPE TDAT
PLAYBACK
Se
Fe
EEEEEE EET je
(eet
{When using two cassette decks]
1. Load the playback tape (i.e. the pre-recorded tape) in
3. Operate the cassette decks to begin copying.
the deck connected to the TAPE 1/DAT jacks, and the
Set the cassette deck with the non-recarded tape to the recording
tape to be recorded in the other deck connected to the
mode, and set the cassette deck with the original tape to the
TAPE
2 jacks.
playback
mode
2, Press the TAPE 1/DAT button.
13
< ARB1 286 >
Advertisement
Need help?
Do you have a question about the SX-2800 and is the answer not in the manual?
Questions and answers