Preset Tuning - Pioneer SX-2800 Operating Instructions Manual

PRESET TUNING
FREQUENCY PRESETTING
Allows three stations per STATION CALL button (press once, twice,
or three times to select).
123 4
LISTENING TO BROADCASTS USING PRESET
TUNING
See ee ee
Koocooooomy i
nT i] —y
i
TE ROS IER,
3,5 3
1. Press the POWER switch to the ON position.
NOTE:
Be sure to turn the TAPE 2 MONITOR button OFF when listening to
AM or FM broadcasts.
2. Set the BAND selector to either FM or AM.
3. Tune in the desired station.
* See the section 'DIRECT ACCESS TUNING" for information on
reception using the Direct Access Tuning mode.
* See the section "AUTO TUNING" for information on reception
using the Auto Tuning mode.
* See the section "MANUAL TUNING" for information on reception
using the Manual Tuning mode.
in addition to station frequencies, the FM MODE (AUTO/MONO)
can also be preset.
4. Press the MEMORY button.
Press the STATION CALL button into which you wish
to preset the station.
* Press the STATION CALL button while the MEMORY indicator
is flashing (about 5 secands).
* Use the STATION CALL buttons {(*1 -- *9, *Oj to select a preset
channel. One press selects the 1 -- 10 range, two presses 17 -
20, and three presses 21 ~ 3
[Example} ff you press button | *3|
Once — STATION 3
Twice ~ STATION 13
Three times — STATION 23
Press a STATION CALL button within two seconds.
sas
When the display stops flashing, the station is preset
NOTE:
Do not press buttons while the display is still flashing.
6. Repeat steps 2 to 5 to preset additional stations.
A total of 30 AM and FM stations may be preset. When you store
anew preset, it takes the place of the previously stored station (if
any)
10
<ARB1285>
1. Press the POWER switch to the ON position.
2. Press the STATION CALL button into which the
desired station has been preset.
Tuning can be performed simply and accurately following the
above procedure.
3. Adjust the volume with the VOLUME control and the
tone with the GRAPHIC EQUALIZER controls.
NOTE:
#f a preset Station has been erased, preset it again.
Last station memory
The last received AM and FM stations remain stored despite FUNCTION
andor POWER switching. To recall, use SAND selector buttons.
HOW TO USE THE CUSTOM MEMORY
Preset stations can be classified into as many as three different genres
according to the material played by the station,
Each of these three
genres can be given @ name, and Memory Scan of all the stations of
@ particular genre can be carried out.
STATION CALL NO. | NAME
1-10 | POP
11-20 ROCK
21-30 | OTHER
tis recommended that you assign station call switches to appropriate
stations to be preset.