Firmware Restoration - Asus RT-N10 User Manual

Wireless ez n router
Hide thumbs Also See for RT-N10:
Table of Contents

Advertisement

Firmware Restoration

Firmware Restoration is used on an ASUS Wireless Router that failed during its
firmware upgrading process. It uploads the firmware that you specify. The process
takes about three to four minutes.
Important: Launch the rescue mode before using the Firmware Restoration utility.
To launch the rescue mode and use the Firmware Restoration utility:
1. Unplug the wireless router from the power source.
. Hold the Restore button at the rear panel and simultaneously re-plug the
wireless router into the power source. Release the Restore button when the
Power LED at the front panel flashes slowly, which indicates that the wireless
router is in the rescue mode.
3. From your computer's desktop, click Start > All Programs > ASUS Utility >
RT-N10 Wireless Router > Firmware Restoration.
4. Specify a firmware file, then click Upload.
Note: This is not a firmware upgrade utility and cannot be used on a working ASUS Wireless
Router. Normal firmware upgrades must be done through the web interface. Refer to
Chapter 4: Configuring via the web GUI for more details.
Chapter 5: Installing the utilities
5
RT-N10

Advertisement

Table of Contents
loading

Table of Contents