Pioneer CT-W950R Operating Instructions Manual page 63

Symptom
The recording indicator
does not light up.
The level meter does not
work.
Immediately stops.
Cannot record
tion does not work.
Recording or playback
starts suddenly when
turning power on.
CD-DECK SYNCHRO is
disabled.
RECORDING
¢ The cassette erasure prevention tabs are
broken.
¢ REC LEVEL control is set too low.
e The amplifier is not delivering a recording sig-
nal (from the tuner, CD player, etc.).
e Wrong connection, connection cord removed,
poor contact, broken wire.
e The tape is completely wound up.
« The tape is slack.
¢ The head is dirty.
OTHERS , |
The music search func- ¢ Blanks between selections are less than 4 se- ¢ Use a tape with blanks more than 4 seconds
conds long.
e TIMER mode selector is set to the PLAY or
REC position.
¢ The components are not connected properly
sini
TROUBLESHOOTING
Remedy
¢ Replace the cassette with one whose tabs are
intact.
® Cover the hole under the tab (see page 26}.
¢ Turn REC LEVEL contro! up (see page 40).
¢ Set the amplifier recording output selector cor-
rectly.
¢ Check connections.
* Record in the opposite direction.
e Rewind the tape.
¢ Take up slack (see page 26).
® Clean the head (see page 6}.
long.
© Set TIMER mode selector to OFF.
© Connect them properly (see page 8).
63
<RRE1039>
En