Pioneer CT-W950R Operating Instructions Manual page 44

RECORDING (AUTO BLE TUNING)
To reset a tuned condition
Press the AUTO BLE button again.
Error display
e If the old tape, the tape end or the leader (white portion) im-
mediately prior to the tape end is reached during AUTO BLE oper-
ation, tuning becomes impossible. That means recording will ,
stop immediately and the counter indicator will display the fol-
lowing (flashing) message: ''Err''.
In this case, press the AUTO BLE button again to reset, and
record without AUTO BLE tuning.
The following illustrates the operation:
(Operation completed within approximately 30 seconds)
Operation Display
Counter i
Pattern display
Leven —Q
atta it t, see
START Meme mrt
@ FF Let late
(Normal
counter)
¢ Adjusting recording level
(sensitivity).
REC
@® REW
PLAY
@ REW
:@
@|.
_@
¢ Adjusting recording equalizer.
(Return to
normal
counter)
44
<RRE1039>
En/Fr
ENREGISTREMENT (ACCORD AUTO BLE)
Pour réinitialiser une condition accordée
Appuyer de nouveau sur la touche AUTO BLE.
Affichage d'erreur
Le tableau suivant décrit l'opération :
(Opération terminée aprés environ 30 secondes)
Affichage
Indicateur Affichage de modéle
de compteur
Opération
(Compteur
normal)
¢ Réglage de la polarisation
d'enregistrement.
® Réglage du niveau d'enregis-
trement (sensibilité).
* Réglage de |'égalisation
d'enregistrement.
(Retour au
compteur
normal)