Reproduction A Relais - Pioneer CT-W950R Operating Instructions Manual

PLAYBACK (RELAY PALYBACK)
RELAY PLAYBACK [3]
REPRODUCTION (REPRODUCTION A RELAIS)
1. Load prerecorded tapes in deck | and deck Il.
2. Set the DOLBY NR switches of both decks | and Il.
@
Always set the switches to the same positions that were used
for recording.
3. Set the REVERSE MODE
switch (see page 32).
4. Set the stereo amplifier for tape playback.
5. Press the RELAY/SKIP button, turning the RELAY/SKIP
indicator on.
6. Press the playback (P or 4) button of the deck that will
start to play first.
@ When the tape in deck one ends, the other deck automati-
cally begins playback.
@ To cancel relay playback, press the RELAY/SKIP button once
again (turning the RELAY/SKIP indicator off).
NOTES:
To stop playback temporarily
Press the pause (—) button.
@ Toresume playback, either press the pause (MM) button again,
or press the playback (P or <) button.
To stop playback
Press the stop (MM) button of the operating deck.
30
<RRE1039>
En/Fr
REMARQUES :
Appuyer sur la touche de pause (HI).
©
Pour reprendre la reproduction, appuyer de nouveau sur la tou-
che de pause (MB) ou sur la touche de reproduction (P ou 4).
Pour arréter la reproduction
Appuyer sur la touche d'arrét ( ™ ) dela platine en fonctionnement.