Reproduction; Reproduction Simple - Pioneer CT-W950R Operating Instructions Manual

PLAYBACK
SINGLE PLAYBACK
(Either deck | or deck I!) G1]
REPRODUCTION
REPRODUCTION SIMPLE
(Platine | ou Platine 1) Gi]
1. Load a prerecorded tape in deck I or Il.
2. Set the DOLBY NR switch of either deck ! or Il.
® Always set the switch to the same position that was used
for recording.
3. Set the REVERSE MODE switch (see page 16).
4. Set the stereo amplifier for tape playback.
5. Press the playback (> or <4) button of either deck I or Il.
To stop playback temporarily
Press the pause (EM) button.
To stop playback
Press the stop (Ml) button.
BLANK SKIP [2]
This function allows you to skip unrecorded portions of the tape
during playback.
Press the RELAY/SKIP button, turning the RELAY/SKIP indicator on.
@ When this mode is selected, if the tape deck encounters an un-
recorded portion of tape more than 15 seconds in length, it will
fast forward the tape until it encounters another recorded por-
tion, and resume playback from that point.
28
<RRE1039>
En/Fr
utilisée pour !'enregistrement.
Appuyer sur la touche de pause (Ill).
Pour arréter la reproduction
Appuyer sur la touche d'arrét ( Ml).
dant la reproduction. Z