Motorola DCX3400 User Manual page 22

High-definition dvr
Hide thumbs Also See for DCX3400:
Table of Contents

Advertisement

4 CONNECTING YOUR DCX SET-TOP
HDMI and IEEE-1394 outputs provide video and audio, so no separate audio
connections are required if you plan to use your TV's speakers as the primary audio
source.
On screen graphics will not be displayed when you are using the IEEE-1394
connection on the rear panel of the DCX set-top. Refer to
information.
If your TV has a DVI input, connect a HDMI-to-DVI adapter or cable to the HDMI out
connector on the DCX set-top and the
Note: DVI does not provide audio. A separate audio connection must be made.
Component video (YPbPr) — HDTV and SDTV
The YPbPr connectors on your DCX set-top provide HDTV and SDTV component
video.
Note: Component video does not provide audio. A separate audio connection must
be made.
S-Video — SDTV
If a component video input is not available on your TV, use the S-Video connection.
Note: S-Video does not provide audio. A separate audio connection must be made.
Composite video — SDTV
If an S-Video input is not available on your TV, use the composite video (video)
connection.
Note: Composite video does not provide audio. A separate audio connection must
be made.
RF Output — SDTV
If no other input is available on your TV, the RF Output of the DCX3400 set-top can
be connected to the Antenna or Cable Input on your TV. The RF Output carries both
video and audio. Set your TV to channel 3 or 4.
connector on your TV.
DVI-HDTV
12
Section 6
for more

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents