Windows Power Management; Power Off - Fujitsu Celsius H7510 User Manual

Windows Power Management

T h e P o w e r O p t i o n s i c o n l o c a t e d i n t h e
Windows Control Panel allows you to configure
some of the power managment settings. For
example, you can use the Power Options to
set the timeout values for turning off the display
and hard disks whether you are running the
workstation on battery power or one of the
adapters.
Restarting The System
If your system is on and you need to restart it,
be sure that you use the following procedure.
Windows 10
1. Click the Windows icon
2. Click the Power, and select Restarting
from the list.
Turning off your workstation without
exiting Windows or turning on your
workstation within 10 seconds of the
workstation being shut off may cause an
error when you start the next time.
Using Your CELSIUS

Power Off

Before turning off power, check that the hard
drive/optical drive access indicator is off. If
you turn off the power while accessing a disk
there is a risk of data loss. To ensure that your
workstation shuts down without error, use the
Windows shut down procedure.
B e s u r e t o c l o s e a l l f i l e s , e x i t a l l
applications, and shut down your operating
system prior to turning off the power. If files
are open when you turn the power off, you
will lose any changes that have not been
saved, and may cause disk errors.
Using the correct procedure to shut down
from Windows allows your workstation to
complete its operations and turn off power
in the proper sequence to avoid errors. The
proper sequence is:
Windows 10
1. Click the Windows icon
2. Click the Power, and select Shut down
from the list.
If you are going to store your workstation for
a month or more see Care and Maintenance
Section.
13