Hibernation (Save-To-Disk) Feature - Fujitsu Celsius H7510 User Manual

•
If you are running your CELSIUS
on battery power, be aware that the
battery continues to discharge while
your workstation is in Suspend mode,
though not as fast as when fully
operational.
• Disabling the Power/Suspend/Resume
button prevents it from being used
to put your CELSIUS in Suspend or
Hibernation(Save-to DIsk) mode. The
resume function of the button cannot
be disabled.
•
The suspend or hibernation(Save-to
-Disk) mode should not be used with
certain PC cards. Check your PC Card
documentation for more information.
When PC Cards or external devices
are in use, Hibernation(Save-to-Disk)
mode cannot return to the exact state
prior to suspension, because all of the
peripheral devices will be re-initialized
when the system restarts.
• If your CELSIUS is actively accessing
i n f o r m a t i o n w h e n y o u e n t e r t h e
Suspend or Hibernate (Save-to Disk)
mode, changes to open files are not
lost. The files are left open and memory
is kept active during Suspend mode
or the memory is transferred to the
internal hard drive during hibernation
mode.
• The main advantage of using the
Hibernation(Save-to-Disk) function is
that power is not required to maintain
your data. This is particularly important
if you wil be leaving your CELSIUS
in a suspended state for a prolonged
period of time. The drawback of using
Hibernation mode is the it lengthens the
power down and power up sequences
and resets peripheral devices.
12
H i b e r n a t i o n ( S a v e - To - D i s k )
Feature
The Hibernation feature saves the contents of
your CELSIUS workstation's system memory
to the hard drive as a part of the Suspend/
Resume mode. You can enable or disable this
feature.
Enable or Disable the Hibernation Feature
Windows 10:
1. Visit Control Panel.
2. Select "System and Security" and then
select "Power Options"
3. Select "Change what power button do", and
click "Change settings that are currently
unavailable".
4. Under "Shutdown Setting", select the Hibernate
tab. Select the box to enable or disable this
feature and click "Save changes" to apply.