Recharging The Battery - Fujitsu Celsius H7510 User Manual

RUNNING CELSIUS
ON ITS BATTERY

Recharging the battery

1. Connect the AC adapter to your
workstation
The moment you connect an AC adapter to
your workstation, the workstation begins to
charge the internal standard battery pack.
2. When the battery level indicator turns off
after the battery is completely charged,
(while the workstation is in off mode)
disconnect the AC adapter from the
workstation.
•
Before using the supplied battery
pack for the very first time after
purchase, remember to charge it fully.
If a charged battery has not been
recharged for more than a month,
charge it fully before using it.
When the battery is fully charged while
•
the workstation is in power off mode,
the Battery Charging Indicator turns off.
8
• When the battery is 90% or more
charged, it cannot be recharged even if
the AC adapter is connected. The battery
can be recharged when its power level(i.e.
remaining battery life) is 89% or less. This
is a mechanism to protect and extend the
battery life.
When a workstation is turned off, the
•
Battery Level LED indicator goes off
immediately if the battery is completely
charged.
The chargeability of the battery degrades
•
when it is used in an extremely hot or cold
place.
When the battery is very hot, for
•
example, immediately after long usage
of the workstation, the battery protection
feature may be activated to prevent the
battery from being recharged. When the
temperature decreases, the workstation
automatically begins to charge the battery.