Electrolux EDV80 Series User Manual page 19

7.5 At the end of the programme
Changing a running programme is
possible only by resetting it.
• The appliance stops automatically.
• The acoustic signal will operate.
• The display shows " End "
• The indicator "
• The indicators "
• The indicator "
appliance continues to operate
with the anticrease phase for
approximately 1 hour or more if
" Extra Anticrease" option was
set (see chapter Option "
Anticrease").
The anticrease phase reduces
creasing. You can remove the laundry
before the anticrease phase is
completed. We recommend, for better
results, that you remove the laundry
when the phase is almost completed.
Always clean the filter when a
programme is completed.
" is on.
" filter may come on.
" is on. The
Extra
7.6 Stand-by function
To reduce energy consumption, this
function automatically deactivates the
appliance:
• After 5 minutes if you do not start the
programme.
• After 5 minutes from the end of the
programme.
ENGLISH 19