Download Print this page

Operation; Filter Change Indicator; Care And Cleaning; Error Code - Electrolux FA41-400PK Instruction Book

Advertisement

OPERATION

Caution: After filter is installed correctly, please
ensure product is placed on a level surface
before proceeding further. Ensure there is
enough free space on top of and around the
product.
5
Connect the power plug.
6
Power on
Power on the product by gently touching the
ON/OFF icon on the center of the product
(ref. picture 6).
7
Air speed control
Change the fan speed by gently touching desired
fan speed icon on the product. You can also slide
your finger across the arc to change fan speed,
Low speed as default setting and if select Max fan
speed, it will reach the Max fan speed within 20s.
(ref. picture 7).
8
Sleep mode
Chose the SLEEP mode by gently touching " "
icon on the product. In SLEEP mode unit will
operate at the low noise level and all indicators
except for SLEEP icon will go off. (ref. picture 8).
9
Power off
Power down the product by gently touching the
ON/OFF icon on the center of the product
(ref. picture 9).

FILTER CHANGE INDICATOR

10
The filter change indicator will light up to
remind you to change the filter.
• When filter change indicator flicker with red
light, please replace the filter and reset the filter
change indicator.
• When filter change indicator stop flicker and the
red light fix, please replace the filter immediately
and reset the filter change indicator.
11
Filter change indicator reset operation
Press the filter change button " "for 3s and filter
change indicator will reset, then red light will go
off.
6

CARE AND CLEANING

12
Unplug the appliance before cleaning to prevent
shock or fire hazards. Use a damp cloth or a
vacuum cleaner with soft brush to clean your air
purifier.
13
The plastic part of the cabinet and top may be
cleaned with an oil-free cloth or washed with a
cloth dampened in a solution of warm water and
mild liquid dishwashing detergent. Be sure to
wring excess water from the cloth before wiping
around the controls. Excess water in or around the
controls may cause damage to the appliance.
14
Never use harsh cleaners, wax or polish when
cleaning the unit.
STORAGE
15
If you are not planning to use the appliance for
a long time, cover it with plastic or return it to its
carton.
NOTE: The multi-layer filter can not be washed, it
can only be replaced.
CAUTION!
Do not touch the fan blade when removing the
multi-layer filter.

ERROR CODE

16
Fan failure error code, when fan failure occurs, the
light of screen will all go off and the unit can't be
operated then.
www.electrolux.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the FA41-400PK and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Flow a4