Installation - Zanussi SL 24 Instructions For The Use And Care

Hide thumbs Also See for SL 24:

INSTALLATION

UNPACKING

After having removed the cardboard packing, reinforcing angles and polythene

wrapping, proceed as follows;

tilt the machine and remove base packing (fig. 1),

Remove back panel and bracket securing motor to back of the appliance

(fig. 2)

3) Remove the 6 screws securing the top of the machine and lift off.

Remove the screws and nuts which fix the transit bar (fig. 3) to the cabinet

Replace top and back panel.

LEVELLING

Move the washer to its permanent operating location and carefully level it by

adjusting the feet and locking them in position with the lock nut (fig. 4). It is

Table of Contents

Need help?

Do you have a question about the SL 24 and is the answer not in the manual?