Mains Connection/Flex Rewind; Using The Floor Cleaning Head; Accessory Nozzles - Aeg Vampyr 825 I Electronic Carat Operating Instructions Manual

2/SBM6 9/91 GB/EU - 2/AD1 9/91 GB/EU - 2/AD2 9/91 GB/EU - 2/AD4 9/91 GB/EU
Mains connection/Flex rewind
The mains cable is located in the cable compart-
ment. Press the foot button for the cable, and pull
the cable out. Insert the plug into the socket.
Atthe end of vacuuming switch off and puil the plug
out of the socket. Press the flex rewind button and
the cable rewinds automatically.
Using the cleaning head and accessory nozzies
The cleaning head and nozzles are attached to the suction tube by pushing and
twisting, and taken apart again by twisting and pulling.
Using the floor cleaning head
For care of carpets and hard floors, the cleaning
head can be adjusted to suit the type of floor with
your foot: í
for carpets
= Symbol for carpet, brush withdrawn
for hard floors
= Symboi for hard floor, brush extended
For other optinal extra floor cleaning heads see
Special Accessories.
Accessory Nozzles - Furniture Brush, Crevice and Upholstery Nozzles
The integrated accessories compartment contains
3 nozzles - a furniture brush, a crevice nozzleanda
upholstery nozzle. Open the compartment by
pressing lightly on the cover as shown in the illus-
tration.
21