Assembling The Vacuum-Cleaner Ready For Use; Suction Tube/Telescopic Tube; Connecting Suction Hose - Aeg Vampyr 825 I Electronic Carat Operating Instructions Manual

20
Assembling the vacuum-cleaner ready for use
The hose, tubes and accessories can be fitted together by oe and twisting, and
taken apart by twisting and pulling.
Fitting the suction hose and suction tube together
Push the tube end of the hose firmly into the suction
tube.
Adjusting the telescopic tube
Slide the button on the tube downwards and set the
tube atthe most convenient length for working with.
' When the button is released the telescopic tube is
A A engaged in the position you require.
wy
Insert the hose holder into the suction opening.
When the hose is to be disconnected from the
appliance, press the release button and pull the
hose holder out of the suction opening.
2/SBM1 9/91 GB/EU - 2/SBM2 9/91 GB/EU - 2/SBM4 9/91 GB/EU - 2/SBM5 9/91 GB/EU