Safety - Husqvarna CG 200 Operator's Manual

Hide thumbs Also See for CG 200:
Table of Contents

Advertisement

Available languages

Available languages

Type plate
220-240V~
IPX3
XXX XXX XXXrpm
S/N: YYY WWWXXXXX
1. Voltage power supply
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
General safety instructions
WARNING:
manual carefully and make sure you
understand the instructions before using the
product.
130 - 005 - 19.08.2024
XXXkW
XXXHz
XXXkg
P/N: XXX XXX XXX
Used if there is a risk of
Used if there is a risk of
Please read the operator's
2. Water resistance
3. Nominal engine output
4. Frequency
5. Rotation speed
6. Weight
7. Production date, year, week, serial number
8. Product number
Product liability
Before leaving our factory every product passes an
exacting inspection programme in which everything is
checked minutely. Following the instructions will ensure
that your product gives long service, in normal operating
conditions.
The manufacturer declines all responsibility for loss
or damage resulting from misuse or any modification,
alteration or powering that does not conform to the
manufacturer's original specifications.
The user advice and spare parts mentioned in this
document are given as an indication, and do not
constitute an undertaking. No warrantee will be granted
in the event of errors or omissions, or for damage
occurring during delivery, or caused by the design or
use of the product. We are very concerned about the
quality of our products and we reserve the right to make
any technical modifications to improve them, without
warning.

Safety

The product is designed to provide safe and reliable
service in operating conditions corresponding with the
instructions, but it can present dangers for the user and
risks of damage, consequently regular on site inspection
is necessary to ensure:
Perfect technical condition (use for the purpose for
which it is intended and taking into account any
risks, and correction of any malfunction detrimental
to safety).
That the warnings and instructions marked on the
product are followed (adequate personal protection,
correct use, general safety instructions, etc).
The product is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge.
Children shall be supervised not to play with the
appliance.
That the product is for commercial use.
That overexposure to vibration can lead to
circulatory damage or nerve damage in people who
have impaired circulation. Contact your doctor if you
experience symptoms of overexposure to vibration.
Such symptoms include numbness, loss of feeling,
tingling, pricking, pain, loss of strength, changes in
skin colour or condition. These symptoms normally
5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CG 200 and is the answer not in the manual?

Questions and answers

Table of Contents