Qr Code Set Length 2; Micro Qr Code; Micro Qr Code Enable/Disable - Datalogic PowerScan 950X-RT Series Product Reference Manual

2D Global Features

QR Code Set Length 2

This feature specifies one of the barcode lengths for
trol. Length 2 is the maximum label length if in Variable Length Mode, or
the second fixed length if in Fixed Length Mode. Characters can be set from
0001 to 7,089 characters in increments of 0001 (pad with zeroes).
See page 276
$CQRL2
Select QR Code Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start
again at the beginning.
DEFAULT

Micro QR Code Enable/Disable

Enables/disables the ability of the reader to decode Micro QR Code labels.
DEFAULT
MQEN01
Micro QR Code = Enable
Product Reference Guide
for detailed instructions on setting this feature.
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE barcode above, then the bar-
code at left followed by the digits from the Alphanu-
meric characters in
representing your desired character(s). End by scan-
ning the ENTER/EXIT barcode again.
Length 2 is 7,089 Characters

MICRO QR CODE

Enter/Exit Programming Mode
QR Code Length Con-
Appendix D, Keypad
~
CANCEL
MQEN00
Micro QR Code = Disable
191