Page 2
Please read this user manual first! Dear Customer, Thank you for choosing Blomberg product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
1 Safety Instructions This section includes the safety • The manufacturer assumes no instructions necessary to pre- responsibility for any damage vent the risk of personal injury or due to misuse or mishandling. material damage. • This appliance is intended to be used in household and sim- Our company shall not be held ilar applications.
• Electrical products are danger- • Damaged power cables should ous for children and pets. Chil- be replaced by the authorised dren or pets should not play service in order to prevent pos- with, climb on top or inside the sible danger.
the mains (fuse, switch, main • Make sure that the hoses as switch, etc.) shall be available well as the power cable are not on the electrical installation. folded, pinched or crushed • Do not touch the plug with wet after the product is fitted into hands.
Page 7
• Always wear personal protect- • Do not plug the product to ive equipment (gloves, etc.) loose, broken, dirty, greasy during product installation, sockets or sockets that has maintenance and repair. There come out their seats or sock- is a risk of injury. ets with a risk of water con- •...
• If a drier is to be placed on the • Do not place sources of igni- product, fix with a suitable con- tion (burning candle, cigar- nection apparatus obtained ettes, etc.) or sources of heat from the authorised service. (irons, furnaces, ovens, etc.) on •...
• Do not directly use dry clean- 2. Cut the power cable and dis- ing detergent and do not wash, connect it with the plug from rinse, spin or dry laundry con- the appliance. taminated with dry cleaning 3. Break the locking mechanism detergent.
Page 10
and clothes) or the ones that • If the drying programmes are are filled and damaged (e.g. interrupted (as a result of pro- Pillows or coats). There is a gramme cancellation or power risk of burns. failure), the laundry in the ma- •...
• If there is a problem that you • Do not use softener or anti- cannot solve using the inform- static agent unless recommen- ation given in the safety in- ded by the manufacturer. structions section, turn off and • Products such as softener unplug the machine and call an should be used in accordance Authorized Service.
• If you need to move the soap, detergent, gas, gasoline, product for cleaning, do not thinner, alcohol, varnish, etc. pull on the cover. The cover while cleaning. can break and cause injury! • Cleaning agents containing • Do not put hands, feet and solvents might reek poisonous metal objects under or behind fumes( for ex.
Page 13
or other wastes. Take them to the pack- aging material collection points designated by the local authorities. EN / 13...
4 Installation Please read the “Safety Instruc- 4.1 Appropriate Installation Loca- tions” section first! tion • Place the product on a hard and level Your washing machine automatic- floor. Do not place it onto a carpet with ally detects the amount of laundry high pile or other similar surfaces.
3. Attach the plastic covers supplied in the Cover A User Manual bag into the holes on the rear panel. WARNING Remove the transportation safety bolts before operating the product. Tilt the machine back slightly. Rest the tabs Otherwise, the product will get of Cover A against the lower panel.
Your house will be flooded if the WARNING Models with a single water inlet water draining hose is dislocated shall not be connected to the hot during water draining. There is also water tap. In such a case the laun- a risk of burning due to the high dry will get damaged or the product washing temperatures.
draining hose of the product with a suit- • Power cable plug must be within easy able clamp so that it does not come off reach after installation. and cause leaks. • If the current supply to the fuse or breaker in the house is less than 13 4.6 Adjusting the Stands Amps, have a qualified electrician install...
Never carry the product without the 4.8 Handling the Product shipping bolts properly attached! 1. Unplug the product before handling it. Your product is so heavy that it 2. Disconnect the water outlet and water shall not be carried by one person. main connections.
5.3 Tips for Energy and Water Sav- 5.5 Loading the Laundry 1. Open the loading door. Following information will help you use the 2. Put the laundry items into the product in product in an ecological and energy/water- a loose manner. efficient manner.
) there is a liquid detergent apparatus The loading door is locked while a for liquid detergent use in the main wash- programme is running. The door ing compartment. lock will open once the programme is completed. If the inner part of the Detergent, Softener and Other Cleaning machine is very hot at the end of Agents...
Page 23
• Please review the programme descrip- • Clean with water at its place or by remov- tions part for suggested programme for ing from its place when it is necessary. different textiles. Do not forget to place the apparatus in •...
• Wipe the inside of the product with a • As bleach may cause skin irritation use damp and clean cloth after using starch. only small amounts (1/2 tea cups - ap- proximately 50 ml and rinse the laundry Using Anti-Limescale well.
Page 25
Powder and liquid deter- It may be necessary to gents recommended for pre-treat the stains or per- colours can be used at form prewash. dosages recommended Prefer liquid deter- Liquid detergents Powder and liquid deter- for heavily soiled gents produced suitable for colours gents recommended for clothes.
starts, in 20-25 minutes actual load is de- programme duration increased automatic- tected by the machine. And if the detected ally. You can follow this change on the dis- load is higher than half load; washing pro- play. gramme will be adjusted accordingly and 6 Operating the Product Please read the “Safety Instruc- tions”...
Symbols shown on the display are 6.4 Selection of Washing Program schematic and may not match with 1. Determine the programme suitable for the product one-to-one. the type, quantity and soiling level of the If you do not want to perform dry- laundry in accordance with "Programme ing process after the programme and consumption table".
Page 30
• Curtain Actual water temperature may be different You can use this programme to wash your from the stated wash temper-ature. When tulles and curtains. As their meshed texture you load the machine with less laundry (e.g. causes excessive foaming, put little amount ½...
Page 31
• Mix Maximum recommended shirt number: Use to wash your cotton and synthetic If the product depth is 50 cm, 4 shirts clothes together without sorting them. If the product depth is 54 - 60 cm, 5 shirts • Underwear You can use this programme to wash delic- ate garments that are suitable for hand You can find the depth information...
If you want to use HomeWhiz fea- Finally, the Cold light that indicates cold ture and Remote Control function, washing illuminates on the display. you must select Downloaded Pro- You can also change the temperature after gramme. Detailed information can the washing starts.
If you are not going to unload your laundry 6.8 Drying Programmes immediately after the programme com- pletes, you can use Rinse Hold function in WARNING order to prevent your laundry from getting The machine automatically cleans wrinkled when there is no water in the ma- the lint that from the laundry during chine.
• Cotton Dry Clean and Wear programme is de- Use this programme to dry cotton laundry signed to quickly wash and dry with a dry weight of up to 5 kilograms. You daily clothes that have been worn can only dry in this programme. for a short time and are not heavily contaminated.
6.10 Programme and Consumption Table You can see the washing duration Please read Installation section of the manual before first use. on the display of your machine while selecting a programme. De- The auxiliary functions in the table may vary according to the model of pending on the amount of laundry you have loaded into your machine, your machine.
When an auxiliary function button 6.11 Auxiliary Function Selection that cannot be selected with the current programme is pressed, the washing machine will make a warn- ing sound. Some functions cannot be selected together. If a second auxiliary func- Select the desired auxiliary functions be- tion conflicting with the first one is fore starting the programme.
If the selected wetness level (Iron • Water Mode Dry, Cupboard Dry, Cupboard Extra This auxiliary function key allows you to se- Dry) cannot be reached at the end lect the additional functions of Water Sav- of the drying programme, your ma- ing, Pre-Wash, and Extra Rinse or Extra wa- chine automatically extends the ter depending on the model of your ma-...
plete. If the function is not cancelled, it will • Remote Control be active in the subsequent washing cycles You can use this auxiliary function button as well. to connect your product to smart devices. For detailed information, see HomeWhiz •...
6.12 Drying Steps 6.13 End Time Time display When the end time function is selected, the remaining time until the programme starts is shown in hours such as 1h, 2h, and the remaining time to complete the programme after your programme starts is shown in hours and minutes as in the 01:30 example.
Additional laundry can be added into the machine during the End Time countdown. At the end of the countdown, End Time indicator turns off, washing cycle starts and the time of the selected pro- If you want to cancel End Time function, gramme appears on the display.
If the Remote Control Function is selected, the door will be locked. In order to open the door you must de- activate Remote Start Function by either pressing the Remote Start button or changing the programme position. 6.16 Changing the Selections After Opening the loading door in case of Programme has Started power failure:...
Switching the machine to pause mode: If you turn the programme selection Press the Start/Pause button to switch the knob when the Child Lock is en- machine to pause mode. Pause symbol will abled, the programme will not be flash on the display. cancelled.
To utilize the HomeWhiz feature, 6.20 HomeWhiz Feature and Re- ensure that the HomeWhiz app is mote Control Function installed on your smart device and You can check your washing machine from that your washing machine is con- smart devices and get information about nected to your home Wi-Fi network.
Control Function button simultaneously Your washing machine will auto- for 3 seconds to switch your machine to matically turn off if you cannot real- HomeWhiz setup mode. ize the setup successfully within 5 minutes. In this case, you have to start the setup process all over again.
1. Download HomeWhiz Application on the 6.20.4 Remote Control Function new smart device you want to use. and Its Use 2. Create a new account and log in to this After HomeWhiz setup, Wireless Connec- account on the HomeWhiz app. tion will automatically turn on.
machine. And all functions except child • When the door of the washing machine is lock can be managed through the applica- opened,. tion. • When programme knob is turned and a different programme selected or appli- You can follow whether the Remote Control ance is turned off.
7.2 Cleaning the Loading Door and 7.4 Cleaning the Water Intake Fil- the Drum ters For products with drum cleaning pro- There is a filter at the end of each water in- gramme, please see the Operating the take valve at the rear of the product and product section.
3. Follow the below procedures in order to NOTE: drain water. Foreign substances left in the pump filter may damage your If the product does not have an emer- product or may cause noise prob- gency water draining hose, in order to lem.
Page 49
Water inside the product. Product stopped shortly after the pro- gramme started. • Some water has remained in the product due to the quality control processes in • Machine has stopped temporarily due to the production. >>> This is not a failure; low voltage.
Page 50
• Number of rinses and/or amount of rins- • Excessive foam has occurred and auto- ing water have increased. >>> Product in- matic foam absorption system has been creases the amount of rinsing water activated due to too much detergent us- when good rinsing is needed and adds an age.
Page 51
• Detergent was put in the wrong compart- • Draining hose is folded. >>> Check the ment. >>> Put the detergent in the correct drain hose. compartment. Do not mix the bleaching Laundry became stiff after washing. (**) agent and the detergent with each other. •...
Page 52
• The detergent in the main wash compart- Foam is overflowing from the detergent ment got wet while taking in the prewash drawer. water. Holes of the detergent compart- • Too much detergent is used. >>> Mix 1 ment are blocked. >>> Check the holes tablespoonful softener and ½...
“Self-Repair” section below, repairs repairs by professional repairers (who shall be addressed to registered profes- are not authorized by Blomberg ) shall sional repairers in order to avoid safety is- void the guarantee. sues. A registered professional repairer is a...
Page 54
dated list is also available in sup- port.blombergappliances.com as of 1st of March 2021) Moreover, to ensure product safety and to prevent risk of serious injury, the mentioned self-repair shall be done following the in- structions in the user manual for self-repair or which are available in support.blomber- gappliances.com For your safety, unplug the product before attempting any self-re-...
Page 55
• Repairs necessary as a direct or indirect result of: – Accidental damage, misuse or abuse of a product. – An attempted repair of a product by anyone other than a Blomberg Approved Engineer (the “Engineer”). – Installation or use of a product where such installation or use fails to meet the re- quirements contained in this guarantee or the User Instructions Booklet.
Page 56
11. Optional extras, where available (i.e. extendable feet) are supplied on a chargeable basis only. Does Blomberg offer replacements? This is a repair-only guarantee. On occasion, the Manufacturer may at its sole discretion, replace your product with a new product instead of carrying out a repair. Where a replace- ment is offered, this would normally be an identical model but when this is not possible, a model of similar specification will be provided.
Page 57
You can register by first visiting blomberguk.com/register and by following the online in- structions. All Blomberg appliances come with a 3 year parts and labour guarantee as standard. When you register your appliance for the Optima Inverter Motor 10 year guarantee, you are also registering your appliance for the standard 3 year parts and labour guarantee.
Page 58
Any repair/replacement of the Optima Inverter motor must only be carried out by an authorised Blomberg Service Agent (the “Service Agent”). Labour for the repair/replacement of the Optima Inverter motor is not included in this guarantee and is chargeable directly by the Service Agent.
Page 59
Please have your Model number and Serial number available when you call us, as you may be required to input your serial number into your telephone keypad during your call. UK Mainland & Northern Ireland: 0333 207 9870 Landline or mobile calls to 0333 numbers cost no more than calls to geographic numbers 01 or 02, and are charged at the basic rate.
Need help?
Do you have a question about the LRF854311W and is the answer not in the manual?
Questions and answers