Frequently-Asked Questions - Acer TravelMate C100 series User Manual

Acer travelmate c100: users guide
Hide thumbs Also See for TravelMate C100 series:
Table of Contents

Advertisement

Frequently-asked questions

The following is a list of possible situations that may arise during the
use of your computer. Easy answers and solutions are provided for
each one.
I pressed the power switch and opened the display, but the computer
does not start or boot-up.
Look at the Power indicator (refer to "Indicators" on page 18):
If it is not lit, no power is being applied to the computer. Check
the following:
If you are running on battery power, it may be low and unable
to power the computer. Connect the AC adapter to recharge
the battery pack.
Make sure that the AC adapter is plugged in properly to the
computer and to the power outlet.
If it is lit, check the following:
Is a non-bootable (non-system) diskette in the floppy drive?
Remove or replace it with a system diskette and press Ctrl-Alt-
Del to restart the system.
The operating system files may be damaged or missing. Insert the
startup disk you created during Windows setup into the floppy
drive and press Ctrl-Alt-Del to restart the system. This will
diagnose your system and make necessary fixes.
Nothing appears on the screen.
The computer's power management system automatically blanks the
screen to save power. Press any key to turn the display back on.
If pressing a key does not turn the display back on, three things might
be the cause:
The brightness level might be too low. Press Fn-→ (increase) and
Fn-← (decrease) to adjust the brightness level.
The display device might be set to an external monitor. Press the
display toggle hot key Fn-F5 to toggle the display back to the
computer.
If the Sleep indicator is lit, the computer is in Sleep mode. Press,
slide, and release the power switch to resume.
61

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

100 series

Table of Contents