Acer ICONIA 6120 User Manual page 86

If you prefer to set the boot priority for long-term use, you should select the
Boot submenu.
1 Turn on your computer and insert the first system recovery disc into the
optical disc drive. Restart your computer.
2 During startup when the Acer logo shows and the virtual keyboard is
displayed, tap the <F2> key to enter BIOS Setup, where you can set system
parameters.
3 Use the left and right arrow keys to select the Boot submenu.
4 Use the up and down arrow keys to select the IDE0 device.
5 Use the <F6> key to move the IDE0 device to the highest boot priority, or
use the <F5> key to move other devices to a lower boot priority. Ensure
that the IDE0 device is the highest priority.
6 Tap the <ESC> key to enter the Exit submenu, press the <ENTER> key to
Exit Saving Changes. Press the ENTER key again to select Yes. The system
will reboot.
7 When you reboot, Windows will be installed from the recovery disc.
8 Insert the second recovery disc when prompted, then follow the onscreen
prompts to complete the restore.
9 Remove the recovery disc from the optical drive once the restore is
complete. Do this before rebooting your computer.
Restore
68