Programmable Functions - Miele W 1918A WASHING MACHINE Operating Instructions Manual

Programmable functions

Programmable functions
Warning - To reduce the risk of fire,
electric shock, or injury to persons,
read the IMPORTANT SAFETY IN-
STRUCTIONS before operating this
appliance.
The following additional functions can
be programmed into the machine if de-
sired:
A
High water level (only in
"Cottons" rinses)
Where rinse results are particularly im-
portant (e.g. Soap allergies).
B
5th Rinse in the "Cottons"
program
For soft water areas (up to 135 ppm
calcium carbonate).
In soft water areas, a higher water level
can be selected in addition to a 5th
rinse cycle, if required.
C
Extra water intake through
compartment i
A 10 second water intake through com-
i
partment during the main wash can
be added.
38
D
Program Lock
(Child Safety Feature)
When activated, the washing machine
will ignore any changes made after the
first three minutes of operation. For ex-
ample, if the Program Selector is
moved to a different setting or an addi-
tional function is selected after the first
three minutes, the "On" lamp will flash,
notifying you that the Child Safety Fea-
ture has been activated. The program
will, however, continue uninterrupted.
This prevents children from inadver-
tently changing or stopping a wash pro-
gram by playing with the dials.
If the Program Selector is turned to its
original position, the "On" lamp will stop
flashing.
To change a program once the Program
Lock is activated:
^ Turn the Program Selector to
"Finish/Start".
After about 30 seconds, the sequence
indicator lamps will start flashing in suc-
cession. A new program can be se-
lected as soon as the "On" lamp is the
only one remaining lit.
E
Additional rinse in Rapid
wash
For soft water areas.
For an extra thorough rinse.
The functions described above can
be programmed by the owner using
the steps shown on the following
pages.