Spinning; Final Spin Speed; Rinse And Interim Spin; To Omit The Final Spin (Rinse Hold/E) - Miele W 1514 Operating Instructions Manual

Final spin speed

Programme
Cottons
Minimum iron
Delicates
Woollens
Express
Automatic
Shirts
Denim
Dark garments
Spin
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.

Rinse and interim spin

There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons programme, an additional rinse
is introduced.

To omit the final spin (Rinse hold/e)

^ Select the Rinse hold/ e setting
rpm
using the Spin speed button. The
1400
laundry will not be spun and will
1200
remain suspended in the final rinse
600
water. This reduces creasing if the
1200
laundry is not going to be removed
1400
from the drum immediately after the
1200
end of the programme.
600
– To start the final spin:
900
The washing machine will display the
1200
maximum spin speed possible. You
1400
can select a spin speed lower than
this. Start the final spin by pressing
the Start/Stop button.
– To end the programme:
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
To omit rinse and interim spin and
the final spin (No u)
^ Select the No u setting using the
Spin speed button. The laundry is not
spun after the final rinse. The water
will drain away and the machine will
go straight into the anti-crease stage.
An additional rinse is introduced if
this setting is selected with the
Cottons , Minimum iron , Express and
Automatic programmes.

Spinning

19