Miele T 1515 VENT ED DRYER Operating Instructions Manual page 15

The vent is blocked or
the lint filter is clogged.
A fabric softener sheet
caused the dryer to
overheat.
– Turn the program selector
to "finish".
– Turn the machine off and
then on again.
– Select a program.
– Press the "Start" button.
If the indicator lamp starts
flashing again, this indicates a
fault in the machine.
Please contact the Miele Ser-
vice Dept.
Clean the vents and the lint fil-
ter.
Do not use fabric softener
sheets. Add fabric softener to
the wash.
If the drum door opens again,
the Miele Service Dept. should
be contacted.
See "Changing the light bulb".
See "Power failure –
Emergency door release".
15