Maintenance And Care - Miele SEB 213 - ANNEXE 561 Operating Instructions Manual

Always make sure the vacuum
cleaner is unplugged and the
Powerbrush is disconnected from
the vacuum before attempting to
clean or service the Powerbrush.
FOR ALL MODELS
To remove threads or hair wrapped
around the roller:
^ Cut the threads or hair using a pair of
scissors. The pieces will be drawn
into the Powerbrush by the suction
power of the vacuum the next time it
is used.
FOR THE SEB 213 & SEB 217
ONLY
Stubborn tangles or other objects can
be removed as follows:
^ Loosen the two lock screws on the
bottom of the Powerbrush using a
coin or screwdriver and remove the
roller cover.
^ Pull up the roller brush until it re-
leases from the main housing, and
slide the drive belt over the end of
the brush. The roller brush and roller
brush compartment can now be
cleaned.

Maintenance and Care

23