10Base-T Hub; 100Base-Tx Hub; Hub Without Uplink (Mdi-Ii) Port - D-Link Des-1016D User Manual
D-link system 10/100 nway ethernet/ fast ethernet switch user's guide des-1016d
Hide thumbs
Also See for DES-1016D:
- Quick installation manual (33 pages) ,
- Manual (20 pages) ,
- Quick install manual (20 pages)
Table of Contents
10/100 NWay Ethernet/Fast Ethernet Switch User's Guide
10BASE-T Hub
For a 10BASE-T hub, the Switch's LED indicators should
illuminate the following:
100Mbps LED speed indicator is OFF.
Link/Act indicator is ON.
100BASE-TX Hub
For a 100BASE-TX hub, the Switch's LED indicators should
illuminate the following:
100Mbps LED speed indicator is ON.
Link/Act is ON.
Hub without Uplink (MDI-II) port
If a hub is not equipped with an Uplink (MDI-II) port, then a
connection can be made using either straight cable or crossover
cable (see Appendix B, Pin Specification for cable requirement).
Connecting The Switch
13
Hide quick links:
Table of Contents
Need help?
Do you have a question about the DES-1016D and is the answer not in the manual?