Haier LET40T3 Instruction Manual page 18

Getting Started
C
Press button to select the item requires adjusting.
D
Press button to adjust the selection item.
E
When you are satisfied with your choice, press the
EXIT button to return to normal viewing or press
MENU button to return to the previous menu.
Language
To select the menu language.
Subtitle Language
To select the Subtitle language.
Display Mode
To set the picture proportion, press
select 4:3/Zoom1/Zoom2/Wide/16:9/Auto. You can
quickly select the desired mode by SCREEN button
on the remote control.
4:3 mode
Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio, with gray bars
appearing at both the left and right sides.
16:9 mode
Choose 16:9 when you want to adjust the picture
horizontally, in a linear proportion to fill the entire
screen.
Zoom1
Choose Zoom1 when you want to view the picture
without any alteration. However, the top and
bottom portions of the picture will be cropped.
Zoom2
Choose Zoom2 when you want the picture to be
altered, both vertically extended and cropped.
The picture taking a halfway trade off between
alteration and screen coverage.
Wide
Choose Wide when you want to adjust the picture
in a non-linear proportion, that is, more enlarged
EN-17 Digital LED LCD Television Instruction Manual
Blue Screen
This will select the character background colour.
Note
Recorder
To record the DTV program. Details of Recording are
described on the page of 25-27.
SCART Input
The item does not work.
OSD Time Out
To set how long you want the menus to appear
on-screen. Each press of
select the number of preset minutes, the Time will be
set in sequence: off, 10sec, 15sec, 30sec, 45sec, 60sec.
button to
OSD Transparency
To set the transparency background of OSD, the
transparency will be set in sequence: Off, 25%, 50%,
75%, 100%.
Reset
To recover to the default value.
at top sides and no alteration, at bottom side.
The Blue Screen function is only available for
ATV mode.
button repeatedly to