Operation Mode - Haier HSU-30LEA13 - annexe 1 Operation Manual

Operation
Comfortable SLEEP
Before going to bed,you can simply press the SLEEP
button and unit will operate in SLEEP mode and bring
you a sound sleep.
SLEEP Operation

Operation Mode

1. In COOL,DRY mode
1 hours after SLEEP mode starts, temp. will
become 1 C higher than temp. setting. After
O
another 1 hours, temp. rises by 1
The unit will run for further 6 hours then stops
Temp. is higher than temp. setting so that room
temperature won't be too Iow for your sleep.
SLEEP operation starts
1 hr
Rises1
1 hr
Temp.setting
In COOL, DRY mode
Power Failure Resume Function
If the unit is started for the first time, the compressor will not
start running unless 3 minutes have elapsed. When the power
resumes after power failure, the unit will run automatically,
and 3 minutes later the compressor starts running.
C further.
O
SLEEP operation stops
Approx.6hrs
Rises 1 C
O
C
O
Unit stop
2. In HEAT mode
1 hours after SLEEP mode starts, temp will
become 2 C lower than temp.setting. After
O
another 1 hours, temp decrease by 2 C
further. After more another 3 hours, temp.
rises by 1 C further. The unit will run for
O
further 3 hours then stops. Temp. is lower
than temp. setting so that room temperature
won't be too high for your sleep.
Temp.setting
1 hr
Decreases 2
1 hr
3 hrs
SLEEP
operation starts
In HEAT mode
3.In AUTO mode
The unit operates in corresponding sleep mode
corresponding sleep mode adapted to the
automatically selected operation mode.
4. In FAN mode
It has no SLEEP function.
5.
When quiet sleeping function is set to 8 hours
the quiet sleeping time can not be adjusted.When
TIMER function is set,the quiet sleeping function
can't be set up.After the sleeping function is set
up,if user resets TIMER function, the sleeping
function will be cancelled; the machine will be in
the state of timing-on,if the two modes are set up
at the same time,either of their operation time is
ended first ,the unit will stop automatically,and
the other mode will be cancelled.
Note to the power failure resume:
press the sleep button ten times in five seconds and enter
function after hearing four sounds.And press the sleep button
ten times within five seconds and leave this function after
hearing two sounds.
O
Unit stop
C
O
Decreases 2 C
O
3 hrs
Rises 1 C
O
SLEEP
operation stops
4