Operation; Auto Operation; Dry Operation; Cool Operation - Haier HSU-24LEA13-M - annexe 1 Operation Manual

Operation

Unit start / stop
Press ON/OFF button, unit starts or stops.
O
ON/OFF TEMP
MODE SET
Select temp.setting
Remote
Operation
Display Board
Controller
Mode
AUTO
COOL
DRY
HEAT
FAN
nothing

Cool Operation

ON/OFF
TEMP
MODE SET

Heat Operation

ON/OFF
TEMP
MODE SET
Note:
In HEAT mode,warm air will blow out after a short periodof the time
due to cold-draft prevention function.
When FAN is set to AUTO, the air conditioner automatically adjusts
the fan speed according to room temperature.
Cooling only unit do not have displays and functions related with heating
ON/OFF TEMP
MODE SET
Note
Under the mode of auto operation, air conditioner will
automatically select Cool or Heat operation according
to room temperature. When FAN is set to AUTO, the
air conditioner automatically adjusts the fan speed
according to room temperature.
In DRY mode, when room temperature becomes
o
lower than temp.setting+2 C,unit will run intermittently
at LOW speed regardless of FAN setting.
In FAN operation mode, the unit will not operate in
COOL or HEAT mode but only in FAN mode ,AUTO is
not available in FAN mode.And temp.setting is disabled.
In FAN mode,SLEEP operation is not available.

Auto Operation

According to the automatic choice
system in temperature in indoors
cold or make the hot movement

Dry Operation

ON/OFF
TEMP
MODE SET
Note:
In DRY mode, when room temperature becomes lower than temp.
o
setting+2 C, unit will run intermittently at LOW speed regardless
of FAN setting.

Fan Operation

(This function is unavailable on some models.)
1.
When FAN is set to AUTO,
the air conditioner
automatically adjusts
the fan speed according AUTO
to room temperature.
2.In FAN operation mode
the unit will not operate
in COOL mode but only
in FAN mode ,AUTO is not available in FAN mode.And temp.setting is disabled.
Air Flow Direction Adjustm
(1)
TIMER
FAN
CLOCK
SWING
SLEEP HEALTH
Remote controller can memorize each operation status. When starting it
next time,just press ON/OFF button and unit will run in previous status.
ON/OFF
TEMP
MODE SET
LO MED HI
MODE SET
TIMER
FAN
CLOCK
SWING
2