Table of Contents
Advertisement
In the Software
1. Open the StarTech.com Device Server Manager.
2. Select "Configure in App" or double click the Serial Device Server in the list.
3. When the Settings Window opens, use the drop down menus to change
Baud Rate, Data Bits, COM Port Number, and more.
Note: If changing the COM Port Number, see "Changing COM Port or Baud
Rate in Windows" on Page 15.
4. Select "Apply Changes" to save the settings.
In the Web Interface
1. Open a web browser.
2. Type the IP address of the Serial Device Server into the address bar.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
13
Advertisement
Table of Contents
Need help?
Do you have a question about the 13-SERIAL-ETHERNET and is the answer not in the manual?
Questions and answers