Download Print this page

Aiwa NSX-V2100 Operating Instructions Manual: Basic Operations

Aiwa operating instruction compact disc stereo system nsx-v2100.
Hide thumbs

Advertisement

BASIC OPERATIONS
LOADING DISCS
Press the CD button,
then
press the & OPEN/
CLOSE button to open the disc compartment.
Load
disc(s) with the label side up.
To play one or two discs, place the discs on tray 1 and 2.
To play three discs, press the DISC CHANGE button to rotate
the trays after placing two discs. Place the third disc on tray 3.
Close the disc compartment by pressing the 4 OPEN/CLOSE
button.
Tray 1
—DISC
CHANGE
Tray number of the
Total playing time
disc to be played
Total number of tracks
PLAYING DISCS
DISC CHANGE~
=
EDIT/CHECK
u
DISC DIRECT PLAY~
Load discs.
7 ENGLISH
RANDOM/
REPEAT
SHIFT
To play all discs in the disc compartment,
press
the E
button.
Play begins with the disc on tray 1.
Elapsed playing time
Number of track
being played
To play one disc only, press one of the DISC DIRECT
PLAY buttons.
The selected disc is played once.
To stop play, press the
button.
To pause play, press the 1I button. To resume play, press again.
To search for a particular point during playback, keep the
4<
or
F button pressed and release the button at the desired
point.
To skip to the beginning of a track during playback, press
the <~
or
*
button repeatedly.
To remove discs, press the = OPEN/CLOSE button.
To start 'play when
the power is off (Direct Play Function)
Press the CD button or one of the DISC DIRECT PLAY buttons.
The power is turned on and play of the loaded disc(s) begins.
To replade discs before play, press the=
OPEN/CLOSE button
to open the disc compartment.
To check the remaining time
Press the EDIT/CHECK button on the remote control during play.
The amount of time remaining until all tracks finish playing is
displayed. To restore the play time display, repeat the above
again.
Selecting a track with the remote control
1
2
Press &e
of the DISC DIRECT PLAY buttons to select a
disc.
Press' the numeric buttons and the +1 O button to select a
track.
Example:
To select the 25th track, press the +1 O, +1 O and 5 buttons.
To selbct the 10th track, press the +1 O and O buttons.
The selected track starts to play and continues to the end of
that disc.
Replacipg
discs during play
While one disc is playing, the other discs can be replaced without
interrupting
play.
1
Press the DISC CHANGE button.
2 Remove the discs and replace with other discs.
3 Press the =
OPEN/CLOSE
button
to close the disc
compartment.
When loading an 8-cm (3-inch) disc, put it onto the inner circle
of the tray.
Do not place more than one compact disc on one disc tray.
Do not tilt the unit with discs loaded.
Doing so may cause
malfunctions.

Advertisement

Table Of Contents

   Related Manuals for Aiwa NSX-V2100

Comments to this Manuals

Symbols: 0
Latest comments: