EX-2 Tone Cabinet Connectors
Located
under both sides of the EX-2 main body, either connectors can be
used.
Connection
is possible with the new-type tone cabinet with built-in
electronic
tremolo
effect and
the number
of tone
cabinets can be freely
increased in accordance with the size of the hall.
GENERAL
Terminal
This can be connected with the new-type tone cabinet with built-in electronic
tremolo effect. Tremolo/chorus effect can be independently issued to Flute
tone and Orchestra tone respectively.
LESLIE Terminal
This can
be directly connected
with
a Leslie speaker (700-705-710-720).
700 and 710 are direct plug 9 pin, 705 and 720 use 9 to 11 pin adaptor.
(EX-2 lower left side)
(EX-2 lower right side)
ePANEL/PEDAL
LIGHT SWITCH
(Input impedance 47k%2, Max. input level —19 dBm)
When
the switch is on, a light is lit to illuminate
e AUX-OUT
(LINE OUTPUT) Terminal
in an intimate atmosphere is possible. When switch-
e EXT-REVERB, U.L./SOLO (EX-1 only)
| Photo shows EX-1.
it to this jack.
e EXT. REVERB (EX-2)
If a synthesizer, etc.
is connected, it is possible to play by changing the
Reverb within the main body is off.
volume with the Electone Expression Pedal.
(Input impedance 47k%2, Max. input level —19 dBm)
AAA
zx;
25
Need help?
Do you have a question about the ELECTONE EX-1 and is the answer not in the manual?
Questions and answers