Dry Operation - Haier HPU-18CRA13 - annexe 1 Operation Manual

Operation
Display board
Remote controller
HEALTH AIRFLOW
FRESH
CODE
COOL operation starts when room
temp.is higher than temp.setting.
o
Temp.setting+2 C
Temp.setting
On reaching temp.setting +2
unit will run in mild DRY mode.
H
1. Unit start
A
2.Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Then Select DRY operation
3.Select temp.setting
POWER/SOFT
4.Fan speed selection
Press FAN button. For each press, fan speed changes as
follows:
Remote controller:
Ultra-low air flow
Air conditioner is running under displayed fan speed.
In DRY mode, when room temperature becomes
lower than temp.setting+2
o
C
at LOW speed regardless of FAN setting.
5.Unit stop
Press ON/OFF button, the unit stops.
Press ON/OFF button, unit starts.
AUTO
Press TEMP. button
Every time the button is pressed, temp.setting
o
increase 1 C,if kept depressed, it will increase
rapidly
Every time the button is pressed, temp.setting
o
decrease 1 C,if kept depressed, it will decrease
rapidly
Select a desired temperature.
12

Dry Operation

COOL DRY FAN
LOW
MED HI
o
C,unit will run intermittently
AUTO