About The Driver Software (Windows) - Pioneer CDJ-350 Operating Instructions Manual

3 Install rekordbox following the instructions on the
screen.
 About the installation procedure (Windows)
Read Cautions on installing the software carefully before installing
rekordbox.
! Authorization of the computer's administrator is required to install
and uninstall rekordbox.
Log on as the user registered as the computer's administrator
before installing rekordbox.
1 Insert the included CD-ROM into the computer's CD
drive.
The CD-ROM menu is displayed.
! If the CD-ROM menu does not appear when the CD-ROM is
inserted, open the CD drive from [Computer (or My Computer)] in
the [Start] menu, then double-click the [CD_menu.exe] icon.
2 When the CD-ROM's menu is displayed, select
[rekordbox: Install Music Management Software], then
click [Start].
<CD-ROM menu>
! To close the CD-ROM menu, click [Exit].
3 Install rekordbox following the instructions on the
screen.
! Click [Cancel] to cancel installation after it has started.
Launching rekordbox
Log on as the user which was set as the computer's administrator
before using rekordbox.
! When rekordbox is started up for the first time, the license key
must be input. The license key is affixed to the CD-ROM package.
! When rekordbox is started up, the operating instructions can be
viewed from the rekordbox [Help] menu.
 For Mac OS X
Open the [Application] folder with Finder, then double-
click [rekordbox 1.x.x.app].
! The 1.x.x indicates the rekordbox version.
 For Windows 7, Windows Vista
®
Click on the Windows [Start] menu button, then [All
Programs] > [Pioneer] > [rekordbox 1.x.x] > [rekordbox
1.x.x].
! The 1.x.x indicates the rekordbox version.
About the driver software
(Windows)
This driver software is an exclusive ASIO driver for outputting audio
signals from the computer. To use the CDJ-350 connected to a com-
puter on which Windows is installed, install the driver software on the
computer beforehand.
Installing the driver software
 Before installing the driver software
! Read Cautions on installing the software on page 10 carefully.
! Turn off this unit's power switch, then disconnect the USB cable
! If any other programs are running on the computer, quit them.
! To install or uninstall the driver software, you need to be autho-
! If you connect this unit to your computer without installing the
! If installation of the driver software is interrupted after it has
1
drive.
The CD-ROM menu is displayed.
! If the CD-ROM menu does not appear when the CD-ROM is
2
Driver Software (Pioneer_CDJ_Driver)], then click [Start].
To close the CD-ROM menu, click [Exit].
3
instructions on the screen.
If [Windows Security] appears on the screen while the installation is
in progress, click [Install this driver software anyway] and continue
with the installation.
! When installing on Windows XP
and Windows XP
® ®
! When the installation program is completed, a completion mes-
Connecting the CDJ-350 and computer
1
For instructions on connecting, see Using DJ software on page 14.
connecting this unit and the computer.
rized by the administrator of your computer. Log on as the adminis-
trator of your computer before proceeding with the installation.
driver software first, an error may occur on your computer depend-
ing on the system environment.
started, start the installation procedure over again from the
beginning.
Insert the included CD-ROM into the computer's CD
inserted, open the CD drive from [Computer (or My Computer)] in
the [Start] menu, then double-click the [CD_menu.exe] icon.
When the CD-ROM menu appears, select [Install
Proceed with installation according to the
If [Hardware Installation] appears on the screen while the instal-
lation is in progress, click [Continue Anyway] and continue with
the installation.
sage appears.
Connect this unit to your computer via a USB cable.
11
En