Page 1
You need to separately prepare the following cables to build the system based on this Th is do c u me n t e x p l ai n s h ow to s e t up a 5 . 1 - o r 7 . 1 - c h an n e l document.
Placing the speakers Set up the speakers in the room by using the following diagram as a reference. For information on other speaker systems, refer to “Owner’s Manual”. 5.1-channel system 7.1-channel system 60° 60° 80° 80° 30 cm (1 ft) or more 60°...
“6 Ω MIN”. For details, see “Setting the speaker impedance” (p.16) in “Owner’s Manual”. • Use a subwoofer equipped with built-in amplifier. • Remove the power cable of this unit from an AC wall outlet and This unit (rear) This unit (rear) turn off the subwoofer before connecting the speakers.
Page 4
Connect the subwoofer ( ) to the For 7.1-channel system ) to the SURROUND ( SUBWOOFER (1) jack. terminals. Connect the surround back speakers ( ) to the SURROUND BACK ( terminals. This unit (rear) This unit (rear) This unit (rear)
OPTICAL HDMI HDMI b Connect the TV and this unit with another HDMI cable. c Connect the TV and this unit with a digital optical cable. HDMI HDMI This connection is required to play back TV audio on this unit. If your TV supports ARC (Audio Return Channel), this connection is unnecessary.
The following screen appears on the TV. By using the Yamaha Parametric room Acoustic Optimizer (YPAO) function, this unit automatically detects speaker connections and distances from the listening position, and optimizes the speaker settings such as volume balance and acoustic parameters to suit your room.
Page 7
Now optimization of the speaker settings is complete. • Since the YPAO microphone is sensitive to heat, do not place the microphone in any place where it will be subjected to direct sunlight or high temperatures (top of an AV equipment, etc).
Check the digital audio output setting on the BD/DVD favorite settings at once (p.42) player. It may be set to output 2-channel audio (PCM, etc.) only. For more information, see “What you can do No sound is heard from a specific speaker with this unit”...