11.Ensure that the connection supervision. between the battery If the supply cord is damaged, charger and battery is it must be replaced by the correctly positioned and is manufacturer, its service Charger KAC02...
16.Charge only battery pack or attachment may increase the risk of injury. Refer of the same model provided to the accessory packaging for further details. Store personnel can assist you and offer advice. by Kress and of models recommended by Kress. Charger KAC02...
For the technical data of the types, the number of cells and the rated capacity of the batteries that Red on Defective Battery can be charged, please refer the nameplate of the battery pack supplied by Kress. Red flash CHARGING PROCEDURE ---------- Hot/Cold Delay NOTE: Before using the tool, read the instruction book carefully.
Check with your remove the Battery Pack from your tool. After local authorities or retailer for recycling advice. recharging, insert the battery pack into the battery port. A simple push and slight pressure will be sufficient. Charger KAC02...
If you need to replace the fitted plug then follow the Postfach 32 02 16, 50796 Cologne, Germany instructions below. On behalf of Positec declare that the product IMPORTANT Kress Battery Charger Description The wires in the mains lead are colored in KAC02 Type...
Page 9
CONFORMITY Positec (UK & Ireland) Ltd, PO Box 6242, Newbury, RG14 9LT, UK On behalf of Positec declare that the product Description Kress Battery Charger Type KAC02 Complies with the following regulations: Electrical Equipment (Safety) Regulations 2016 Electromagnetic Compatibility Regulations 2016...
Need help?
Do you have a question about the KAC02 and is the answer not in the manual?
Questions and answers