D-Link DWL-520 Manual page 35

Networking Basics
Assigning a Static IP Address (continued)
• Select Use the following IP address
in the Internet Protocol (TCP/IP) Properties window.
• Input your IP address and subnet mask. (The IP Addresses on your
network must be within the same range. For example, if one computer
has an IP Address of 192.168.0.2, the other computers should have IP
Addresses that are between 192.168.0.3 and 192.168.0.254. No two
computers can have the same IP Address. The subnet mask must be the
same for all the computers on the network.)
IP Address:
e.g.,192.168.0.2
Subnet Mask:
255.255.255.0
Default Gateway: Enter
the LAN IP address of
the Wireless Router.
(D-Link wireless routers
have a LAN IP address
of 192.168.0.1)
•
Select Use the
following DNS server
address. Enter the
LAN IP address of the
Wireless Router. (D-Link
wireless routers have a
LAN IP address of
192.168.0.1)
• Click OK
You have completed the assignment of a Static IP Address. (You do not need to
assign a Static IP Address if you have a DHCP-capable Gateway/Router.)
Fig. 7.25
35
192 168 0 1
192 168 0 1