D-Link DWL-520 Manual page 22

C. Search for the files TIACXLN.INF and TIACXLN.SYS.
6. The computer with the DWL-520+ installed is unable to connect to
the wireless network and/or the Internet.
• Check that the LED indicators for the broadband modem are
indicating normal activity. If not, there may be a problem with the
broadband connection.
• Check that the LED indicators on the wireless router are functioning
properly. If not, check that the AC power and Ethernet cables are
firmly connected.
• Check that the IP Address, subnet mask, gateway, and DNS settings
are correctly entered for the network
• In Infrastructure mode, make sure the same Service Set Identifier
(SSID) is specified on the settings for the wireless clients and access
points.
products is default. (Double-click on the WLAN icon in the taskbar.
The Link Info screen will display the SSID setting.)
• In Ad-Hoc mode, both wireless clients will need to have the same
SSID. Please note that it might be necessary to set up one client to
establish a BSS (Basic Service Set) and wait briefly before setting
up other clients. This prevents several clients from trying to establish
a BSS at the same time, which can result in multiple singular BSSs
being established, rather than a single BSS with multiple clients
associated to it.
• Check that the Network Connection for the wireless client is
configured properly. Select AP (Infrastructure) when connecting to
an access point and select Ad-Hoc mode when connecting without
an access point. Double-click on the WLAN icon in the taskbar >
click on Configuration to change the settings for the wireless
adapter.
• If Security is enabled, make sure that the correct encryption keys are
entered on both the DWL-520+ and the access point. Double-click
on the WLAN icon in the taskbar > click Encryption. Check to see
Remove these files from the INF and SYSTEM32
(DRIVERS) folders in the Windows directory.
Windows XP and Windows 2000 will rename .inf files that
have not received WHQL certification into oem.inf files (e.g.,
oem1.inf.)
The SSID factory default setting for the D-Link AirPlus
22
Note: