General Information - Haier DW9-TFE3 Instructions For Use Manual

General information

Measures must be taken to ensure that built-under and built-in units that are later used as free-
standing appliances cannot topple over. This can be achieved by bolting the dishwasher to the wall
or fitting it under a continuous work surface which is screwed to the adjacent cupboards.
Information on conformity tests implemented in compliance with EN
50242
Appliance loaded in accordance with standard specifications.
Example of loaded dishwasher: See Fig 1 and 2
Capacity: 9 place settings
Programme: Light Wash
Rinse-aid setting: 5
Detergent: 5g+25g
Fig.1
Height-adjustable top-basket must be inserted in the uppermost position.
If the conformity tests do not comply fully with EN 50242, e.g., degree of soiling, type of dishes and
cutlery, etc., contact the appliance manufacturer before starting the test.
en
Fig.2
26