Control Panel - Electrolux LUC4NE23XL User Manual

• The appliance must be earthed. The
power supply cable plug is provided with a
contact for this purpose. If the domestic
power supply socket is not earthed,
connect the appliance to a separate earth
in compliance with current regulations,
consulting a qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.

4. CONTROL PANEL

4.1 Display
1
4 3
Temperature scale
1
Temperature key
2
ECO mode icon
3
FastFreeze icon
4
4.2 Switching on
1. Plug the appliance into electrical mains
socket.
2. To turn on the appliance, touch the
temperature key. All LED indicators light
up.
The temperature is set to the default setting
(ECO mode). LED indicator next to ECO
mode icon illuminates.
4.3 Switching off
1. To switch off the appliance press the
temperature key for 3 seconds.
All LED indicators turn off.
2. To disconnect the appliance from the
electrical supply, remove the mains plug
from the power socket.
4.4 Temperature regulation
To regulate the temperature, press the
temperature key. Every time the key is
pressed, the set temperature moves by one
8 ENGLISH
3.4 Door reversibility
Please refer to the separate document with
instructions on installation and door reversal.
position and corresponding LED indicator
lights up. Press the temperature key
repeatedly until the required temperature is
2
selected. The setting will be fixed.
The set temperature will be reached within 24
hours. After a power failure the set
temperature remains stored.
4.5 ECO mode
In this mode the temperature is set to -18°C.
To activate ECO mode press the temperature
key repeatedly until LED indicator next to
ECO mode icon lights up.
4.6 FastFreeze function
This function is used to perform pre-freezing
and fast freezing in sequence in the freezer
compartment. It accelerates the freezing of
fresh food and, at the same time, protects
food products already stored in the
compartment from undesirable warming.
CAUTION!
At every stage of reversing the door
protect the floor from scratching with a
durable material.
Selection is progressive, varying from
-15°C to -24°C.
Recommended setting is -18°C. You can
activate it also by ECO mode.
This is the best setting to ensure good
food preservation with minimal energy
consumption.