Zanussi TLS 683 C Instruction Manual page 16

The wash results are not as usual
Check that :
= was the wrong quantity or the wrong detergent
added ? Insufficient detergent leads to grey washes
and scale deposits in the machine. Check the
quantities more exactly.
mwere special stains pre-treated ?
uwere programme and temperature correctly
chosen ?
The washing cycle is very much too long. | Check that :
athe water pression is sufficient.
athe pump filter is not obstructed.
a there has not been a power breakdown.
The washing machine stops during a
washing cycle.
Check that :
athe water pression is sufficient.
athe pump filter is not obstructed.
athe mains fuse is intact.
a there is not a rinse hold ending a washing
programme (see the programmes chart page 11).
The machine does not start up Check that :
athe mains fuse is intact.
athe appliance is plugged in,.
athe lid is firmly shut.
athe programme selector dial is correctly positioned.
athe beginning of the programme has been ordered
(on/off pushbutton pushed on).
athere has not been a power breakdown.
The machine does not drain and/or does
not spin
Check that :
athe drain hose is not squashed or bent.
a the drain filter is not clogged.
The machine does not fill Check that :
athe inlet water hose is opened and the water
pression is sufficent.
athe lid of the appliance is closed.
athere has not been a breakwater.
16