Page 1
A18SFN16GA A18SFN16GANZ Original instructions...
Page 2
LED light button Trigger switch No-mar pad Belt clip screw Belt clip Depth-of-drive adjustment No-mar pad Jam release LED light for A18SFN16GA only p. 3 p. 4 p. 4 p. 5 p. 5 p. 5 p. 6 p. 7 p. 8...
Page 3
Remove the battery pack before starting any work on the product. 75-100 % 50-75 % 25-50 % 0-25 %...
Page 4
Remove the battery pack before starting any work on the product. for A18SFN16GA only...
Page 5
Remove the battery pack before starting any work on the product.
Page 6
Remove the battery pack before starting any work on the product.
Page 7
Remove the battery pack before starting any work on the product.
Page 8
16GA Brad nails Diameter 1.6 mm Length min./max 25 - 65 mm Recommended cycle rate 700 / hour Burst cycle rate (A18SFN16GA) – bump fire mode 2 / second Burst cycle rate (A18SFN16GANZ) 1 / second Magazine capacity 112 nails Fastener range...
Do not point the product towards yourself or anyone nearby when components need to be replaced which have not been described, adjusting the depth of drive. please contact one of our AEG service agents (see our list of Ambient temperature range for tool during operation is between 0°C guarantee/service addresses).
Do not dispose of electric tools, batteries/rechargeable batteries together with household waste material. Electric tools and batteries that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. Check with your local authority or retailer for recycling advice and collection point.
Page 12
Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC, 3149, Australia Techtronic Industries N.Z. Limited AEG is a registered trade mark used under Unit C, 70 Business Parade South, license from AB Electrolux (publ). Highbrook, Auckland 2013, New Zealand...
Need help?
Do you have a question about the A18SFN16GA and is the answer not in the manual?
Questions and answers