Download Print this page

TII network technologies HPTURBO Specifications

Ethernet-turbo combination ethernet adapter

Advertisement

Quick Links

TII HNP6L-ET
Combination Ethernet
Turbo Adapter and
Home Networking
Protector
Extends Home Networks
Without Having to Install
New Wires
Plug-and-Play Installation
Network up to 16 Computers
Data at Every AC Receptacle
Easy to Relocate
Enables Broadband throughout
the House
Range: Approx. 300 Meters in
Wall Power Lines
Compatible with Mac, Linux,
Unix and Microsoft Operating
Systems
Data Rates Up to 85 Mbps
Capable of Transmitting High
Definition Images
The TII HNP6L-ET Ethernet-Turbo Combination Ethernet Adapter and Home
Networking Protector provides total surge protection for the computer system
including its peripherals such as modems, scanners, monitors, printers and routers.
The HNP6L-ET also incorporates an Ethernet HomePlug
networking over existing AC wiring. Traditional surge protectors interfere with data
transmitted over AC wiring utilizing HomePlug
KEY PRODUCT BENEFITS
Protects all connected computer equipment including HomePlug
Incorporates Ethernet HomePlug
over existing 110 volt AC wiring. Maximum data rate of 85 Mbps.
LEDs for power line link and Ethernet link.
Six EMI filtered receptacles prevent unwanted electrical noise from being
introduced into the circuit by peripheral devices. This electrical noise degrades
signal transmission quality and speed.
Proprietary Hybrid AC Protection Circuit:
120VAC, Single Phase, 50/60 Hz 15 Amp Power Line Protection.
Self restoring power line surge suppressor incorporating gas discharge tube and
solid-state surge suppression elements.
When plugged into an AC receptacle, the AC protection circuit monitors the
integrity of the protection in addition to indicating the presence of a ground.
Protection & Ground Detection Indicator Lamps
Protection Available: Green lamp "on" indicates protection circuit is operational.
Ground Present: Green lamp "on" indicates there is a connection to the AC
ground.
Ground Not Present: Red lamp "on" indicates that the unit did not detect the
presence of an AC ground. The surge protection capability of the TII HNP6L-ET
has been compromised.
Common grounding for the AC protector circuit serves as a ground potential
equalizer eliminating any ground loop currents that may damage the connected
equipment.
INDUSTRY STANDARDS
Listed to UL 1449.
Continuous Joule Rating (CJR): Estimate of cumulative surge
energy absorbed by this device over its useful life.
CATEGORY
HOME NETWORKING
TII HNP6L-ET
®
circuit which provides data
®
technology.
®
turbo circuitry for high-speed data transport
®
data networks.
®
HomePlug
is a
Registered Trademark of
M E M B E R

Advertisement

loading

Summary of Contents for TII network technologies HPTURBO

  • Page 1 Ground Present: Green lamp “on” indicates there is a connection to the AC ground. Ground Not Present: Red lamp “on” indicates that the unit did not detect the presence of an AC ground. The surge protection capability of the TII HNP6L-ET has been compromised.
  • Page 2 TII Product 12.50 3.75 2.00 Dimensions Are In Inches S P E C I F I C A T I O N S SURGE SUPPRESSOR PERFORMANCE AC SURGE SUPPRESSION (EMI Filtered Receptacles) Insertion Loss (2 – 27 MHz) > 30 dB Suppression Voltage –...

This manual is also suitable for:

Hnp6l-et