Before Operation - Aiwa LCX-301 Operating Instructions Manual

D
SHIFT
FUNCTION
{
,,--—-----
Y
am
C2C2
a=
am
C3
Caao
:C3C2C2
GIG
'... ..__ ----
0 >.:___
_
..1
;
—0
BEFORE OPERATION
To turn the unit on
Press one of the function buttons (TAPE, TUNER, AUX/VIDEO,
CD).
Playback of the inserted disc or tape begins, or the previously
tuned station is received (Direct Play Function).
The POWER button is also available.
When using the battery cord while operating on car battery
(DC 12 V), press the POWER button or one of the function
buttons (DIRECT PLAY function) a little longer to turn the unit
on.
After use
Press the POWER button to turn off the power. The display
changes to the clock.
Using the headphones
Connect headphones to the PHONES jack with a stereo mini
plug
(0 3..5 t71M/
'/8
inch).
No sound is output from the speakers while the headphones are
plugged in.
REMOTE CONTROL
Inserting batteries +
Detach the battery cover on the rear of the remote control and
insert two R6 (size AA) batteries.
When to replace the batteries
The maximum operational distance between the remote control
and the sensor in the display window should be approximately 5
meters (16 feet). When this distance decreases, replace the
batteries with new ones.
m
If the unit is not going to be used for an extended period of
time, remove the batteries to prevent possible electrolyte
leakage.
The remote control may not operate correctly when:
- the line of sight between the remote control and the remote
sensor is exposed to intense light, such as direct sunlight.
- other remote controls are used nearby (television, etc.).
To
use the SHIFT button + H
Buttons @ have two different functions. One of these functions
is indicated on the button, and the other on the plate above the
button.
To use the function on the button, simply press the button.
To use the function on the pIate above the button, press the
button while pressing the SHIFT button.
To use the
FUNCTION button + El
The FUNCTION button substitutes for the function buttons (TAPE,
TUNER, AUXiVIDEO, CD) on the main unit.
Each time the FUNCTION button is pressed, the next function is
selected cyclically.