Setting Hdmi Functions - Yamaha HTR-5063 Owner's Manual

Owners manual
Hide thumbs Also See for HTR-5063:
Table of Contents

Advertisement

Auto-adjusting Dolby Digital and DTS
dynamic range
Dynamic Range
Selects the dynamic range adjustment method for audio bitstream
(Dolby Digital and DTS) signal playback.
Min/Auto
(Min) Sets the dynamic range suitable for low volume
or a quiet environment, such as at night, for bitstream
signals except for Dolby TrueHD signals.
(Auto) Adjusts the dynamic range for Dolby TrueHD
signals based on input signal information.
STD
Adjusts the dynamic range for optimum volume for
regular home use.
Max (Default)
Produces audio without adjusting the dynamic range.
Setting the maximum volume
Max Volume
Sets a maximum volume level so that the audio is not played too
loudly. The default setting of +16.5 dB produces the highest
volume.
Adjustable range
-30.0 dB to +15.0 dB / +16.5 dB (Maximum volume)
Default setting
+16.5 dB
Adjustment
5.0 dB
increments
J
1 :
When you set the "Max Volume" at a lower level than "Init.Volume," the "Max
Volume" setting has priority.
J
2 :
This menu item appears depending on the "Control" setting.
J
3 :
This menu item appears depending on the "Resolution" setting.
Setting the startup volume
Init.Volume
Sets the initial volume for when this receiver is turned on. When
this parameter is set to "Off," the volume is set at the level when the
J1
receiver last entered standby mode.
Adjustable range
Off, Mute, -80 dB to +16.5 dB
Default setting
Off
Adjustment
0.5 dB
increments
Setting various functions (Setup menu)

Setting HDMI functions

;
HDMI Setup
;;;;;;;;;
. Control
;;;;;
TV Audio In
;
AudioReturnChan
;;;
Resolution
*Thrgh
[ ]/[ ]:Up/Down
[p]/[[]:Select
HDMI Setup submenu
Control
Turns the HDMI Control on or off.
TV Audio In
J2
Chooses automatically selected audio input in
conjunction with TV operation when the
HDMI Control is turned on.
AudioReturnChan
J2
Transmits audio/video output to the TV and
audio input from the TV through a single
HDMI cable.
Standby Through
J2
Selects whether HDMI audio/video signals will
be continue to be produced when this unit is on
standby.
Audio Output
J2
Selects the audio output device connected to
this unit via HDMI jacks.
Resolution
Sets the resolution of video signals converted
from analog to HDMI.
J3
Aspect
Sets the horizontal-to-vertical ratio (aspect
ratio) of video signals converted from analog to
HDMI.
SETUP
On
AV4
Off
55
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Htr5063blRx-v567

Table of Contents